Quotulatiousness

May 26, 2011

Charles Stross on Buckminster Fuller’s “Dymaxion House”

Filed under: Architecture, Economics, History, Technology — Tags: , — Nicholas @ 12:07

I remember something about Fuller’s potentially revolutionary design for housing from a few mentions in Robert Heinlein’s work, but I’d never followed up those hints. Charles Stross did:

. . . the Dymaxion House was probably the most fascinating of his failures, because it was nothing short of an attempt to revolutionize how we live.

Modernist architects of the 20th century generally designed two types of house: those for rich architects and other members of the upper classes to enjoy, and grimly regimented concrete cookie-cutter apartment blocks for factory workers. Fuller’s approach to housing was cookie-cutter-esque, insofar as he planned to mass-produce Dymaxion Houses on converted B-29 Superfortress production lines after the second world war, and ship them to their owners in freight containers, but as far as I know it was radically different in conception, purpose, and design from any of the other modular homes of the period. For one thing, he was interested in portability and nomadism; while a concrete foundation with utility connections was necessary, Fuller’s idea of moving house was that you could pack your house down into a container that would fit on a truck, drive it to your new neighbourhood, and deploy it again — the design influences of the traditional Mongolian yurt should be obvious. The Dymaxion House used aluminium sheeting for floors and structures, suspended by wires from a central steel structural shaft: saving weight was a priority. As he famously asked an architect on one occasion, “why are your houses so heavy?”

For another thing, he took an early interest in minimizing the human impact on the environment. The Dymaxion House had passive air temperature control and a pressure-triggered roof vent to survive near-misses from tornados (by releasing over-pressure inside the building so that it didn’t rupture). It had a then-unique mist-spray shower and a grey-water system to reduce water usage; Fuller was also interested in non-flush toilets.

Finally, it was intended to be mass produced for $6,500 per house in 1946 money — the cost of a high-end automobile — with a design life of 30-50 years. Early development was funded by the Pentagon, for reasons that should be obvious: WWII generated unprecedented demand for accommodation on bases overseas and, later, demand for housing in war-ravaged regions.

The story of why we aren’t all living in Dymaxion houses today is a convoluted epic of business failure (for one thing, starting up a production line for houses using cutting-edge aerospace technology was something that had never been done before; for another, Bucky’s business sense was not, sadly, as good as his design sense) that has been recounted in numerous biographies. What interests me about it is that it’s a far more humane approach to the problem of providing housing for the masses than his Brutalist contemporaries, whose designs tended to be fixed, immovable, made cheaply out of low-end materials, and built with high density mass housing in mind rather than low impact customizability. It was also way ahead of the field in terms of awareness of environmental constraints; while we could design better today, we’d be making incremental tweaks, whereas Bucky came up with the original idea of modular, lightweight, mobile low-impact housing ab initio.

Image detail from Tim O’Reilly’s Flikr photostream.

More, including a few photos at Wikipedia. And Rivet-head has a picture of the house while it was in use.

May 25, 2011

How to cope with rapidly changing technology, Victorian style

Filed under: Britain, History, Military, Technology, Weapons — Tags: , , , — Nicholas @ 00:04

I just finished reading John Beeler’s Birth of the Battleship: British Capital Ship Design 1870-1881, which looks at a time where all the accepted norms of the previous three hundred years were all upset overnight.

In 1815, the Royal Navy was the unchallenged Mistress of the Seas: the most powerful navy in the world. France, the greatest threat to England and her trading empire, had just been destroyed as a military and naval power. The United States had survived the war, but had effectively been neutralized on the sea through much hard fighting. No other rival appeared close to challenging England’s primacy.

Fifty years later, the stasis is being broken technologically. Wind power is giving way to steam. Solid shell cannon are starting to give way to both larger and more complex weapons. Iron is starting to supplant oak as the material of choice for shipbuilding. The renowned duel between USS Monitor and CSS Virginia (formerly the USS Merrimac) sets all the major navies of the world busy considering how to protect their existing fleets and merchant vessels against the new threat of the ironclad.

The English government is suddenly faced with the stark reality that their entire fleet has become or is about to become obsolete. Neither Monitor nor Virginia are ocean-going ships, but the message is clear that no wooden vessel has a prayer of survival against the modern steam-powered ironclad. And even the greatest economic power in the world can’t replace an entire fleet overnight.

The Admiralty couldn’t depend on past experience for guidance, as everything they’d done for hundreds of years was now undecided: what kind of ships do you need to build? How will they be armed? How will they be armoured? How will they be propelled? Bureaucracies are, by nature, not well equipped to face challenges like this. The Royal Navy, from the late 1860’s until the late 1880’s struggled with finding the correct answer, or combination of answers, to meet the needs of the day.

I admit that my interest in British Imperial history fades very quickly after 1815 and only starts to pick up again in the 1870’s, and what little I’d retained of the reading I’d done left me with much disdain for the obvious pattern of muddle and stop-gap planning that clearly defined the Royal Navy’s approach to maintaining the fleet during that time period. I was very wrong in my assumptions, but I was far from alone.

To start with, I assumed that the retention of full sailing rig on steam-powered ships proved the raw incompetence of the Admiralty and their ship designers. What I failed to understand was that there were really two different navies operating under the same flag: the home fleet — close to home port with easy access to coal, drydock, and re-supply — and the colonial fleet which had none of those advantages. Merchant vessels of the 1850-1870 era could depend on refuelling at each end of their scheduled journeys (between fully equipped ports), while the Royal Navy could not. The steam engines of that time period were very inefficient and prone to breakdown: lose your engine in the Indian Ocean or the South Atlantic and you were almost certain to be lost. Sail was essential for Royal Navy ships outside home waters.

Iron as armour was a major step forward, but not without costs: it is far heavier than wood and because you needed it to protect the above-the-waterline essentials of the ship, it made it much harder to ensure that the ship would be stable and sufficiently buoyant in heavy seas (see the story of HMS Captain for an example of what could happen otherwise). It’s always been a rule of thumb in military affairs that you can’t protect everything: by trying to protect everything, you spread your forces (or your armour) too thin and you end up being too weak everywhere. This holds true especially for ship’s armour.

At the same time that you need to add armour to protect the ship, you also need to mount heavier, larger guns. Between placing your order with the shipyard for a new ship, the metallurgical wizards may have (and frequently did) come up with bigger, better guns that could defeat the armour on your not-yet-launched ship. Oh, and you now needed to revise the design of the ship to carry the newer, heavier guns, too.

The ship designers were in a race with the gun designers to see who could defeat the latest design by the other group. It’s no wonder that ships could become obsolete between ordering and coming into service: sometimes, they could become obsolete before launch.

The weapons themselves were undergoing change at a relatively unprecedented rate. As late at the mid-1870’s, a good case could be made for muzzle-loading cannon being mounted on warships: until the gas seal of the breech-loader could be made safe, muzzle-loaders had an advantage of not killing their own crews at distressingly high frequency. Once that technological handicap had been overcome, then the argument came down to the best way to mount the weapons: turrets or barbettes.

To the modern eye, the answer is obvious, but to the men responsible for making the decisions, it was far from obvious that the turret was the better answer. Turrets are heavier than barbettes and required clearer fields of fire (few masted-and-rigged ships could also carry turrets), and also generally required the turret to be mounted higher on the superstructure, which made the ship more top-heavy than an equivalent barbette vessel.

The other weapon controversy at the time was what the primary weapons of the battlefleet would be: gun, torpedo, or ram. The argument for the ram was the weakest, although CSS Virginia had done more damage to the Union fleet with her ram than with her guns. The torpedo was still in the transition stage from something that had to be physically pushed against an enemy ship (like a ram with an explosive charge) and the more modern notion of a self-propelled, unmanned weapon. Perhaps the argument was sealed by the accidental sinking of the HMS Victoria less than a decade later (a less-than-charitable interpretation of the event was fictionalized in Kind Hearts and Coronets in 1949).

In some ways it’s remarkable that the hidebound bureaucrats could keep up in the world’s first real arms race . . . and not only keep up, but stay (slightly) ahead. Each new class of battleship had to be equal to or better than the latest French, German, or Italian ships, yet also stay within fairly strict length, breadth, and displacement limits without going (too far) over budget. Oh, and also be capable of adaptation to whatever new naval gun had been introduced in the time between the ships being laid down and being brought into commission.

To the modern eye, even of someone who followed the general trend of naval technology, the Royal Navy of the early 1880’s looks like a random collection of misfit ships. What isn’t apparent is how much worse the picture could have been. Aside from the bombardment of Alexandria, the Royal Navy of Victoria’s reign exercised a policing rather than a strictly military role: they didn’t need to fight too often because they were clearly stronger than any potential adversaries.

May 17, 2011

Memristor breakthrough

Filed under: Technology — Tags: , , — Nicholas @ 09:12

A report at The Register talks about HP’s new leads in the development of the “memristor”:

HP scientists have made a breakthrough in the development of memristors, a fundamental circuit type that looks increasingly likely to replace NAND flash and possibly DRAM.

Essentially, they’ve figured out the physical and chemical mechanisms that make memristors work.

“We were on a path where we would have had something that works reasonably well, but this improves our confidence and should allow us to improve the devices such that they are significantly better,” the leader of the HP research team, R. Stanley Williams, told IDG News.

Memristors are the fourth fundamental type of passive circuitry, along with the resistor, capacitor and inductor. Like flash, memristors are nonvolatile — they “remember” their state when power isn’t applied to them.

The core advantage of memristors is that they can theoretically achieve speeds 10 times that of flash at one-tenth the power budget per cell. They can also be stacked, enabling exceptionally dense memory structures.

Of course, this is all still in the research lab, so don’t expect to see memristor technology show up in your next tablet or smartphone. It could be several years before the new tech becomes widely available.

May 13, 2011

Would you fly in a glass airplane?

Filed under: Science, Technology — Tags: , — Nicholas @ 08:24

If Professor William Johnson is successful with the new process, you may see lots of structural glass in use:

A new breakthrough in superspeed pulse mould technology will allow aeroplanes, mobile phone casings and suchlike to be made out of a miraculous type of glass which is as tough as metal, according to the inventors of the new process.

So-called “metallic glass” has been well known since 1960 and has been in industrial production since the 1990s. It is a metal alloy, but one with the disordered structure of glass — not formed into crystals the way most metals are.

The crystalline structure of metal is a disadvantage, making it weak. Unfortunately, ordinary glasses — while strong and rigid — generally crack and shatter easily. What’s wanted is a metallic glass, made of metal but with a non-crystalline structure like window glass. This won’t crack or fracture, but will be much stronger than an equivalent object made of ordinary metal.

[. . .]

“We uniformly heat the glass at least a thousand times faster than anyone has before,” says William Johnson, engineering prof at Caltech.

Using this method the metalglass is heated up, moulded and cooled to solid again before crystals have any chance to form: the new part is still metalglass, not rubbishy regular metal.

“We end up with inexpensive, high-performance, precision parts made in the same way plastic parts are made — but made of a metal that’s 20 times stronger and stiffer than plastic,” boasts Johnson.

April 1, 2011

Google introduces “Gmail Motion”

Filed under: Humour, Technology — Tags: , , — Nicholas @ 07:35

March 29, 2011

“Steampunk” industrial machinery

Filed under: History, Railways, Randomness, Technology — Tags: , , , — Nicholas @ 08:06

This is a set of Hulett ore unloaders in Cleveland in the late 1980’s and early 1990’s shortly before they were finally retired. You can readily see how the Victorian imagination could lend itself to monstrous walking engines, given the huge mechanical marvels to be seen working along the dockside.

H/T to Robert Netzlof for the link.

March 28, 2011

“How does it work, then? Basically they aren’t too sure”

Filed under: Randomness, Technology — Tags: — Nicholas @ 08:52

This one sounds positively science-fictiony:

Boffins in America say they’re on the track of a backpack electro-beam forcefield device capable of snuffing out raging fires without any need for water, hoses or other traditional firefighting apparatus. Apart from portable applications, they raise the possibility that the new technology might replace building sprinkler systems with ceiling mounted conflagration-squelching zapper terminals.

“Controlling fires is an enormously difficult challenge,” says Dr Ludovico Cademartiri. “Our research has shown that by applying large electric fields we can suppress flames very rapidly. We’re very excited about the results.”

Cademartiri and his fellow boffins at Harvard uni have tested their flame-zapping gizmo in the lab, using a 600-watt amplifier hooked up to a “wand-like probe”. This setup was apparently able to snuff out test flames “more than a foot high”. The team think that it should be possible to get similar effects with a less power-hungry system using 60W or less, raising the possibility of portable equipment.

So, not quite ready to snuff out the soaring flames of a major fire, yet.

March 23, 2011

Breaking! New iPhone 5 features revealed!

Filed under: Humour, Technology — Tags: , , , — Nicholas @ 14:49

Image from PC World article which is a bit more serious than the graphic might indicate.

March 19, 2011

American Digest: This is why Kodak is withering away

Filed under: Bureaucracy, History, Randomness — Tags: , , — Nicholas @ 00:11

Tell me that this simple idea has never occurred to anyone at Kodak:

If the company that calls itself Kodak today had a brain, it would copy the “Instamatic 100” from Kodak’s greatest hits, drop a first rate lens in it, add some great chips, a view screen as big as the back of the camera, and rebrand it as the “Kodak Digimatic 100.” Instant win.

Kodak Instamatic

They’ll never be cool enough to do it. Somewhere in the 1990s, Kodak lost the ability to design and innovate. Once the king of the camera world, Kodak’s now just the place where bad designs and worse marketing go to die. Today, Kodak needs a brain the same way Scarecrow needed one in the first reel of “Wizard of Oz.” Like Scarecrow, there’s a long brick road awinding into the land of its dreams.

It wasn’t always that way. There was a time when it seemed that everyone in America owned an Instamatic. It was a camera that, in its simplicity, elegance and rock-bottom cost, was an icon of its age

Of course, doing it now would be far too late: this was a winning strategy for 2001, not 2011. If they do it now, it’ll flop because they’ve squandered all the immense goodwill that used to be associated with the company name. It was the “everyman” camera and film: professionals had their specialized cameras and even more specialized film, but everyone else just bought Kodak. Kodak was “good enough”, dependable, predictable.

It takes immense lack of talent to fumble that much potential so thoroughly and so consistently. Almost a genius level of anti-talent at the corporate level.

March 18, 2011

Tim Harford: The management lessons from the war in Iraq

Filed under: Bureaucracy, Middle East, Military, USA — Tags: , , , — Nicholas @ 12:09

March 17, 2011

Ever wonder how a sewing machine works?

Filed under: History, Technology — Tags: , — Nicholas @ 09:16

H/T to Jeff Scarbrough for the link.

March 16, 2011

Guest post: Virginia Postrel and the “magic” iPad

Filed under: Technology — Tags: , , , , — Nicholas @ 11:16

This was written by Jon, my former virtual landlord, in an email to me earlier today. I’ve asked his permission to post it on the blog.

Did you see this Wall Street Journal post?

When Apple introduced the iPad last year, it added a new buzzword to technology marketing. The device, it declared, was not just “revolutionary,” a tech-hype cliché, but “magical.” Skeptics rolled their eyes, and one Apple fan even started an online petition against such superstitious language.

But the company stuck with the term. When Steve Jobs appeared on stage last week to unveil the iPad 2, which hit stores Friday, he said, “People laughed at us for using the word ‘magical,’ but, you know what, it’s turned out to be magical.”

I’m not sure what she’s on about when get gets to magic and dissing “makers” and hackers for their disdain of such. More on that later.

Sadly, I think love for the iPad is explained in much simpler terms: it is a shiny object, and people like shiny objects.

The thing is well proportioned (I’ve not looked at the specs, but I suspect that golden ratio proportions are present in its design), it has a polished surface, the display is bright and vivid — and people simply dig that sort of thing. I admit that I find the things attractive, but not attractive enough to overcome what are, for me, wallet-crushing limitations:

  • No ROI. I cannot be measurably productive on an iPad — I could not write or code or draw on the thing — so I’m never going to make back its cost. I’ve been able to pay for all of my computers by being productive on them, but that would not happen on the iPad. For that to happen, I would have to devote far more time than I have to, say, learning how to program for the thing — and that’s not likely to happen. Your mileage will, of course, vary on this: if you can measure and assign a dollar value to the time saved by having a portable internet access point around the office, plant, home, or on the road, then you’ll see more of a return here. At present, though, I don’t need that — at least not in a way that can be represented by income or cashflow.
  • Hyper-accelerated planned obsolescence. Apple is notorious for this — the next generation of device typically makes the earlier generation either less desirable or downright useless. My first — and only — Mac taught me this lesson, and I won’t fall for it again — at least not with an Apple product. The device becoming less desirable may not be an issue for most people, unless they are stylish hipsters who buy the device simply for its value as a fashion accessory. The reduced functionality, lack of updates, and lack of development support might be a real problem for people who bought the things for measurable productivity. So again, as ever and always, your mileage will vary.

Another thing that keeps me from buying one of these is that I can see that they are not going to age well. A portable device is going to get beat up, and the iPad will lose much of its Jobs-gizz-polished luster as the screen gets greasy and smudged, the case gets dinged and pitted, and then, finally — horror of horrors — the screen gets a deep corner-to-corner gouge after you read about the next generation device, drop the thing face down in shock, accidentally kick it into the next stall, and the hobo there picks it up and does who knows what with it before passing it back to you under the cubicle wall. Something as precious as the iPad just will not weather that sort of abuse. And even if it did, would you really want it back after that?

Postrel dibbles:

Even the “maker ethic” of do-it-yourself hobbyists depends on having the right ingredients and tools, from computers, lasers and video cameras to plywood, snaps and glue. Extraordinarily rare even among the most accomplished seamstresses, chefs and carpenters are those who spin their own fibers, thresh their own wheat or trim their own lumber — all once common skills. Rarer still is the Linux hacker who makes his own chips. Who among us can reproduce from scratch every component of a pencil or a pencil skirt? We don’t notice their magic — or the wonder of electricity or eyeglasses, anesthesia or aspirin — only because we’re used to them.

I’m not sure what to make of that. It sounds like she’s saying that hackers should revere the iPad simply because they could not make one themselves from scratch. By that logic, I should revere a shipping pallet because I could not make one from scratch — and I’m thinking beyond my lack of woodworking skills here. To Postrel, the shipping pallet should be seen as magic because I did not plant the acorn that grew into the oak that I cut down with the axe that I forged myself from ore that . . . oh, screw it, you know where I’m going with this and have better things to do with your time than to follow me there).

Postrel is missing the fact that clever people have commoditized magic: they’ve found methods to manufacture tedious or complicated things in ways that make them commonplace and disposable. It’s true that your average hacker could not build an iPad from scratch, starting from raw silicon and copper and gold and dead plankton transmogrified into petrochemicals. I mean, really, who has the time to farm plankton, wait for them to die, settle to the bottom of the ocean, be covered by sediment, be compressed through the build-up of rock strata over geological epochs — sorry, I’m doing it again. While your average hacker is not going to build an iPad from raw materials, your average hacker could probably build a world-changing application for a popular platform if that platform were open.

The article throws out the old groan about any sufficiently advanced technology being indistinguishable from magic. To those who don’t think too much about how that technology works, it certainly must seem like magic. What’s truly magical, though, is when such magic is commoditized and becomes commonplace. It goes from being a flashy-bangy trick to something that’s actually useful. Sadly, Apple is not building magic — they are building a captive audience.

Damnit. I’ve been letting this stew for a couple of days, and I can see that it’s just going to boil down to some lame bromide about how free markets and free access to products that one actually owns after paying for them are what is truly magical, but I’m just not going to go there. So I’m going to consider this done and send it off.

March 10, 2011

Very early railway film

Filed under: History, Media, Railways, Technology — Tags: , — Nicholas @ 10:12

H/T to “JtMc” for the link.

March 8, 2011

QotD: Don’t look forward to the summer crop of movies

Filed under: Media, Quotations — Tags: , — Nicholas @ 13:06

. . . let’s look ahead to what’s on the menu for this year: four adaptations of comic books. One prequel to an adaptation of a comic book. One sequel to a sequel to a movie based on a toy. One sequel to a sequel to a sequel to a movie based on an amusement-park ride. One prequel to a remake. Two sequels to cartoons. One sequel to a comedy. An adaptation of a children’s book. An adaptation of a Saturday-morning cartoon. One sequel with a 4 in the title. Two sequels with a 5 in the title. One sequel that, if it were inclined to use numbers, would have to have a 7 1/2 in the title.1

And no Inception. Now, to be fair, in modern Hollywood, it usually takes two years, not one, for an idea to make its way through the alimentary canal of the system and onto multiplex screens, so we should really be looking at summer 2012 to see the fruit of Nolan’s success. So here’s what’s on tap two summers from now: an adaptation of a comic book. A reboot of an adaptation of a comic book. A sequel to a sequel to an adaptation of a comic book. A sequel to a reboot of an adaptation of a TV show. A sequel to a sequel to a reboot of an adaptation of a comic book. A sequel to a cartoon. A sequel to a sequel to a cartoon. A sequel to a sequel to a sequel to a cartoon. A sequel to a sequel to a sequel to a sequel to a movie based on a young-adult novel.2 And soon after: Stretch Armstrong. You remember Stretch Armstrong, right? That rubberized doll you could stretch and then stretch again, at least until the sludge inside the doll would dry up and he would become Osteoporosis Armstrong? A toy that offered less narrative interest than bingo?

[. . .]

1. Captain America, Cowboys & Aliens, Green Lantern, and Thor; X-Men: First Class; Transformers 3; Pirates of the Caribbean: On Stranger Tides; Rise of the Apes; Cars 2 and Kung Fu Panda 2; The Hangover Part II; Winnie the Pooh; The Smurfs in 3D; Spy Kids 4; Fast Five and Final Destination 5; Harry Potter and the Deathly Hallows Part 2.

2. The Avengers; Spider-Man (3D); Men in Black 3 (3D); Star Trek untitled; Batman 3; Monsters, Inc. 2; Madagascar 3; Ice Age: Continental Drift in 3D; The Twilight Saga: Breaking Dawn, Part 2.

Mark Harris, “The Day the Movies Died”, GQ, 2011-02

February 18, 2011

Ron Hickman, inventor of the ubiquitous Workmate

Filed under: Randomness, Technology, Tools — Tags: , , , , — Nicholas @ 08:23

Many people have bought and used the Workmate collapsible workbench . . . 30 million or so. The inventor, Ron Hickman, Ron Hickman, died recently:

Hickman, who lived in Jersey, was 78. His design for the wood-and-steel foldable workbench and vice was rejected by several tool companies that believed the bench wouldn’t sell.

Tool company Stanley told him the device would sell in the dozens rather than hundreds, while other companies told him the design would not sell at the necessary price. It has since sold about 30 million units around the world, and 60,000 were sold in the UK last year alone.

Hickman sold the benches himself when he couldn’t find a backer through trade shows direct to professional builders. Black & Decker saw the light in 1973 and began producing them. By 1981 it had sold 10 million benches.

He came up with the design when he accidentally sawed through an expensive chair while making a wardrobe. He had been using the chair as a workbench.

His designing skill wasn’t limited to tools: he also is credited with the design of the Lotus Elan.

« Newer PostsOlder Posts »

Powered by WordPress