That may explain the extraordinary amount of sucking up to Canada in this movie [Bowling for Columbine], which, while gratifying to insecure Canucks and self-loathing Americans, may be of less interest to third parties. Moore’s thesis, such as it is, is that America’s murder rate is the consequence not just of the country’s love of guns but of deeper currents of paranoia and fear in the American psyche. To that end, he crosses the Michigan border into Ontario, where one Canadian after another tells him that they don’t lock their doors. The level of guns per capita in Canada is similar to America but the murder rate is much, much lower. Ergo, it must be because Americans are living in fear while Canadians are much more socially progressive.
Whatever, dude. Unlike Moore, I have homes on both sides of the border and it’s the Quebec one I keep locked. By the time you read this, I’ll be in New York, but my home in New Hampshire will be unlocked, and so will my car at the airport, the key in the ignition, so I’ll know where to find it. By contrast, in Quebec it’s illegal to leave your car unlocked, even if you stop for a pee on an ice floe up by Hudson’s Bay. Pace Moore, Canada has vastly lower rates of handgun ownership. Long-gun ownership is much closer, but, statistically, Canadians are slightly more murderous than Americans in this sphere: in the US, there are 1.7 homicides per 100,000 long guns; in Canada, it’s 1.9. So European visitors to North America should be aware they’re more likely to be killed by a homicidal Canadian rifleman than an American one.
On the overall murder rate, if Moore’s interested in “cultural differences”, it seems odd that he should avoid the most obvious one. Alberta Report‘s Colby Cosh, a braver man than I, points out that black Americans are 13 per cent of the US population but commit over half the murders. Once you factor those out, non-black Americans murder at about the same rate as Canadians.
Mark Steyn, “Bowling for Columbine”, Steyn Online, 2002-11-30.
July 20, 2024
QotD: Comparing gun crime in Canada and the United States
July 10, 2024
Two World Wars: Finnish C96 “Ukko-Mauser”
Forgotten Weapons
Published Mar 27, 2024A decent number of C96 Mauser pistols were present in Finland’s civil war, many of them coming into the country with the Finnish Jaegers, and others from a variety of sources, commercial and Russian. They were used by both the Reds and the Whites, and in both 9x19mm and 7.63x25mm. After the end of the civil war, when the military was standardizing, the C96s were handed over to the Civil Guard, where they generally remained until recalled to army inventories in 1939. They once again saw service in the Winter War and Continuation War, and went into military stores afterwards until eventually being surplussed as obsolete.
One of the interesting aspects of Finnish C96s is that many of them come from the so-called “Scandinavian Contract” batch (for which no contract has actually turned up). These appear to be guns made in 7.63mm that were numbered as part of the early production in the Prussian “Red 9” series, probably for delivery to specific German units or partner forces during World War One.
(more…)
June 13, 2024
QotD: Gun safety is for always
Everybody with a logo-embroidered polo shirt wants to come up with a replacement for Cooper’s Rule One: “All guns are always loaded”. It’s a target for the ire of everybody with the slightest hint of Aspie tendencies, because they plainly know that there’s such a thing as an unloaded gun.
The entire point of Rule One is that when you are handling a firearm, you need to be mindful. You need to be constantly aware of the fact that what you have in your hand is not a banana or a can of soup but an object that can, under the right circumstances, discharge a projectile with lethal consequences.
Chuck Haggard says that one shouldn’t have separate habits of handling for “loaded” and “unloaded” guns because when one is tired or distracted, one can inadvertently default to the wrong one. (“How do you dry-fire, Tam?” As though I’m expecting a loud noise at any moment. And I sure don’t have that gun pointed at anything I’m not prepared to pay for if I’m wrong about the gun’s status.)
[…]
What you see there with the chief in the video and with the guy in the picture above is bad gun-handling habits at work. This is why, whether I’m handling an actual firearm or a SIRT or a blue gun or an airsoft or whatever, I am very conscious of where the muzzle is pointing and do not point or wave it around casually. I want the default, habitual behavior for when there is a gun-shaped object in my hand to be caution and awareness. I always want the action of aiming a gun at something to be a conscious and deliberate choice.
And I don’t ever want to have to utter the words “Oh my God, I’m sorry! I thought it was unloaded!”
Tamara Keel, “Safety Is For Always”, View From The Porch, 2016-06-06.
May 24, 2024
Grant Hammond .32 ACP Prototype
Forgotten Weapons
Published Apr 6, 2015Grant Hammond is best known (to the extent he is known at all) for a .45 caliber pistol submitted to US military trials in 1917 and 1918. This pistol is a proof of concept prototype embodying some of the concepts that would go into the later .45 caliber pistol, and also showing some concepts that would not see further use. This .32 ACP prototype features a hybrid blow forward / blow back mechanism in which the slide uses a gas trapping system to move forward and the bolt moves backward. It also has a unique system for automatically ejecting the magazine when empty. Truly one of the most mechanically unusual pistols I have ever seen.
May 8, 2024
Walther Volkspistole
Forgotten Weapons
Published Mar 11, 2015As the Second World War started to really take a toll on German industrial production, several companies started to work on alternatives to the P38 handgun in an effort to reduce production cost and time. This is one such example made by Walther, with a normal type of milled slide and an experimental frame made from stamped sheet steel. It uses a rotating barrel mechanism taken from Nickl (and the Steyr-Hahn before him), and uses standard P38 magazines. None of these designs actually made it into production before the end of the war.
(more…)
April 26, 2024
Guns for the Pope’s Police: Mazzocchi Pinfire Revolver
Forgotten Weapons
Published Jan 22, 2024The revolver we are looking at today is a 9mm pinfire revolver adopted for the Papal Gendarmerie in 1868. At that time, the Papal States controlled roughly the same amount of territory as Switzerland today, and had its own armed forced for internal security — the Papal Gendarmerie. The Papal States had previously adopted a 12mm Lefaucheux revolver for its army, but this was deemed too bulky for the Gendarmes. So in 1867, they went looking for a smaller new pistol. The Mazzocchi brothers in Rome had been official armorers to the Vatican for three generations (their shop was actually located in Castel St Angelo until 1850!), and they won the contract for the Gendarmerie with this revolver model. A total of 2500 were made in 1868 and 1869, at 50 Papal Lira each.
(more…)
April 23, 2024
The 1950 Marketing Contest to Name the S&W Chiefs Special
Forgotten Weapons
Published Jan 19, 2024Today we’re taking a look at a Smith & Wesson Chiefs Special, but not just any Chiefs Special. This is serial number 29, factory engraved and gifted to Chief Edward Boyko of Passaic New Jersey in 1950. When S&W introduced the new revolver to compete with Colt’s Detective Special, they simply called it the “Model J” (it was the first of the J-frame S&W revolvers). They released it at the 1950 annual conference of the International Association of Chiefs of Police, and ran a contest among to attendees to name the new gun.
Chief Edward Boyko’s suggestion of “Chiefs Special” was (perhaps unsurprisingly, given the audience) voted winner, and S&W gave him a personally engraved example as a prize. He would carry that gun for another 10 years as Passaic Chief of Police before retiring in 1960.
The Chiefs Special was essentially a slightly scaled-up I-frame revolver, strengthened to handle the .38 Special cartridge instead of the previous .38 S&W option. This extremely early example has a number of features not present on standard production guns, including the small trigger guard, large cylinder release latch, and semi-circular front sight.
(more…)
April 14, 2024
Elmer Keith’s Revolver Number 5
Forgotten Weapons
Published Feb 28, 2015Elmer Keith’s No.5 Single Action Army is arguably the most famous custom revolver ever made. Keith had it built in 1928 after developing a friendship with Harold Croft, another revolver enthusiast. Croft had shown Keith his own custom revolvers, which he had numbered 1 through 4. Croft had been trying to make an ideal pocket gun, and Keith used several of his ideas along with some of Keith’s own to put together a revolver for general-purpose field use. In recognition of Croft’s work, Keith called his gun Number 5. It featured an extended flat top with windage-adjustable sights, an improved mainspring, redesigned cylinder pin, custom hammer spur, and modified Bisley grip. It was chambered for the .44 Special/.44 Russian cartridges (the Russian being a slightly shorter version of the Special), and it was Keith’s favorite shooting piece until the .44 Magnum cartridge was introduced in the late 1950s. He described this gun in detail in a 1929 American Rifleman article entitled “The Last Word”.
http://www.forgottenweapons.com
Theme music by Dylan Benson – http://dbproductioncompany.webs.com
March 18, 2024
Moore’s Patent Revolver (Swing-Out Cylinder)
Forgotten Weapons
Published Feb 13, 2015Manufactured in Brooklyn from 1861 until 1863, Moore’s revolver was a 7-shot single-action piece firing .32 rimfire cartridges. What makes it unique is its swing-out cylinder design — the first commercial revolver in the US to use this mechanism. A latch on the back of the frame released the entire barrel and cylinder assembly, allowing it to tip over to the right, exposing the chambers for loading and unloading. The ejector rod is stored under the barrel, but must be removed and used by hand when needed. Moore’s revolvers were popular with New Yorkers heading off to the Civil War and almost 8000 were made, but production was halted when Rollin White successfully sued for patent infringement (over his patent on the bored-though cylinder).
http://www.forgottenweapons.com
Theme music by Dylan Benson – http://dbproductioncompany.webs.com
March 15, 2024
Starr DA & SA Revolvers
Forgotten Weapons
Published Feb 4, 2015Starr revolvers are one of the less recognized designs used in the US Civil War, although tens of thousands of them were made and issued. Indeed, in many ways they were superior to the much more common Colt and Remington revolvers of the period. One of the interesting facts about the Starr is that the double action design came first, and was only replaced with the more typical single action design several years into the war (due to problems with price and complexity). Today we’re taking a look at a pair of Starrs, one single action and one double action. Ultimately the company shut down after the end of the war, and Colt would go on to dominate the revolver market in the United States.
(more…)
March 12, 2024
Vektor CP-1: Recalled to the Mother Ship
Forgotten Weapons
Published Dec 8, 2023The Vektor CP-1 was developed by Lyttleton Engineering Works (who owned the Vektor brand) in 1995 for a South African Police contract. They lost that contract to the Republic Arms RAP-401, but decided to put the CP-1 onto the civilian market instead. It was a pretty decent seller for them, and after a couple years they started importing it into the US. Things went bad when it turned out the the gun wasn’t quite drop-safe, and in late 2000 they were recalled for a repair. Some were repaired and returned to owners, but a great many were simply repurchased by Vektor instead. In light of the recall and potential future problems with the US legal outlook, Vektor USA was dissolved circa 2001.
Mechanically, the CP1 is a gas-delayed blowback pistol in 9mm Parabellum. It came with 12- and 13-round magazines (10 rounds in the US, because of the Assault Weapons Ban). It was hammer fired, and used a polymer frame (the first such made in South Africa). Its futuristic design lines are very deliberate, and its biggest shortcoming is a fairly heavy trigger, for being single action only. It has a somewhat unorthodox trigger safety, and also a Garand-style manual safety in the front of the trigger guard.
In today’s video, we will take a look at both an original configuration example and also one rebuilt after the recall, with a new firing pin block mechanism.
(more…)
February 8, 2024
Beretta 1915: The first of the Beretta pistols
Forgotten Weapons
Published Jun 22, 2016The Italian military went into WWI having already adopted a semiautomatic sidearm — the Model 1910 Glisenti (and its somewhat simplified Brixia cousin). However, the 1910 Glisenti was a very complex design, and much too expensive to be practical for the needs of the global cataclysm that was the Great War. In response to a need for something cheaper, Tulio Marengoni of the Beretta company designed the Model 1915, a simple blowback handgun chambered for the 9mm Glisenti cartridge.
Only 15,300 of the Model 1915 pistol were made, because even they proved to be a bit more than the military really needed. One of their most interesting mechanical features is a pair of manual safeties — one on the back of the frame to lock the hammer and one on the left side to block the trigger. This proved a bit redundant, and the gun overall was rather large and heavy. In 1917 a scaled-down version in .32 ACP (7.65mm) was introduced which would be produced in much larger numbers. The 1915/17 would also omit the rather unnecessary hammer safety.
It is important to note that while the 9mm Glisenti cartridge is dimensionally interchangeable with 9×19 Parabellum, pistols designed for the Glisenti cartridge should never be used with standard 9×19 ammunition, as it is nearly 50% more powerful than the Glisenti specs, and doing so will quickly cause damage (and potentially catastrophic failure).
November 29, 2023
Yugoslav M57: Tito’s Tokarev
Forgotten Weapons
Published 7 Aug 2023Yugoslavia purchased both 1895 Nagant revolvers and TT33 Tokarev from the Soviet Union after World War Two, but this was only a holdover until domestic pistol production could begin. While Yugoslavia was formally communist, Tito was not a puppet of Moscow, and Yugoslavia did their own development to reverse-engineer the Tokarev pistol. In the process, they made a number of improvements to the design, resulting in the M57. Serial production began in 1963 and lasted until 1982, with about 270,000 made in total. It was the standard sidearm for the Yugoslav People’s Army and Yugoslav police forces until 1988.
The changes made from the standard Soviet pattern Tokarev include:
– Longer grip and 9-round magazine capacity
– Captive recoil spring
– Improved front sight
– Stronger firing pin with improved retention system
– Magazine disconnect safety
(more…)
November 26, 2023
Lancaster Howdah Pistols
Forgotten Weapons
Published 8 Nov 2014Charles Lancaster was a London master gunsmith who made 2-barrel and 4-barrel pistols in a variety of British revolver cartridges (commonly known as Howdah pistols). Many of his pistols was purchased privately by British military officers, explorers, and big-game hunters to use as backup weapons throughout the Empire. These three examples are chambered for the .380, .476, and .577 centerfire cartridges, and are all excellent examples of Lancaster’s work and the quality of Victorian-era British craftsmanship.
(more…)
November 16, 2023
Maryland Council of Safety Revolutionary Flintlock
Forgotten Weapons
Published 20 Nov 2014In the buildup to the US War of Independence, “Committees of Safety” were organized in the colonial state to form shadow governments for the independence movement. These committees (or councils, as a few were named) had, among other tasks, the responsibility of sourcing arms for the local militia forces.
This was done both by purchasing arms available at the time from gunsmiths, commercial dealers, and private individuals and also by contracting with gunsmiths to manufacture guns specifically for the council or committee. Typically these guns were not specially marked — there was no particular reason to do so — and as a result they are very difficult to authenticate today. A Revolutionary War weapon could have been anything available at the time.
One notable exception is an order placed by the Maryland Council of Safety. They ordered quite a lot of guns from area manufacturers, including a batch of 500 pistols. In addition, they hired an inspector to verify the quality of the finished guns, and mark them. The inspector was named Thomas Ewing, and his marking looked rather like a tulip. Records about the guns he oversaw and marked remain in existence, and allow them to be identified — including this example.
(more…)



