Paul Sellers
Published on 24 Aug 2018Fitting castors to your bench makes it much easier to move your bench around the shop with minimal effort. Paul shows how he fixed his in place.
More info on the Workbench can be downloaded here:
https://paulsellers.com/paul-sellers-…There is more discussion on these videos on Woodworking Masterclasses. You can sign up (for free) here: https://woodworkingmasterclasses.com/…
Music credit:
Henry Horrell (https://soundcloud.com/henry-horrell)For more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
September 15, 2018
Fitting the Castors | Paul Sellers
Comments Off on Fitting the Castors | Paul Sellers
August 30, 2018
An Introduction to Perspective Drawing | Paul Sellers
Paul Sellers
Published on 29 Aug 2018300,000 is a big number! Thank you all for subscribing. Paul wanted to do this video for a while but since we ended up filming this right around the time we passed this milestone we are thinking about making the original drawing the giveaway. Would you like the drawing to hang on your shop wall? Oh, and if you haven’t already, please subscribe!
How do you get a project idea down on paper? Drawing is a great way of communicating your design to those around you. Paul has always sketched and drawn his own designs and in this video shows you how to create your own perspective drawings.
For more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
Comments Off on An Introduction to Perspective Drawing | Paul Sellers
August 28, 2018
Why old-timey woodworkers’ screws held better (How to bore proper pilot holes)
Stumpy Nubs
Published on 6 Aug 2018SUBSCRIBE (FREE) TO STUMPY NUBS WOODWORKING JOURNAL►http://www.stumpynubs.com
Comments Off on Why old-timey woodworkers’ screws held better (How to bore proper pilot holes)
August 18, 2018
How to Use a Square Awl | Paul Sellers
Paul Sellers
Published on 17 Aug 2018This simple tool is one of Paul’s favourites. It is so simple and yet often overlooked. When it comes to making small starter holes for screws nothing beats an awl but you have to have the right type and use it correctly. Watch this video to see this unique tool in action and see why it is such a great tool for your toolkit.
For more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
Comments Off on How to Use a Square Awl | Paul Sellers
August 16, 2018
STOP wasting money on chisels! Most woodworkers only need ONE!
Stumpy Nubs
Published on 24 Jul 2018
Comments Off on STOP wasting money on chisels! Most woodworkers only need ONE!
August 11, 2018
Sharpening Stone Shelves | Paul Sellers
Paul Sellers
Published on 10 Aug 2018These shelves keep Paul’s sharpening stones close at hand for convenience and separate them from the rest of his tools as they can get dirty. Follow along to fit solid useful shelves at the end of your bench.
More info on the Workbench can be downloaded here:
https://paulsellers.com/paul-sellers-…There is more discussion on these videos on Woodworking Masterclasses. You can sign up (for free) here: https://woodworkingmasterclasses.com/…
Music credit:
Henry Horrell (https://soundcloud.com/henry-horrell)For more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
Comments Off on Sharpening Stone Shelves | Paul Sellers
August 8, 2018
How to cut a BRIDLE JOINT by HAND
Matt Estlea
Published on 17 Nov 2017In this video, I’ll be showing you how to cut a bridle joint entirely by hand, no power tools what so ever! This woodworking joint looks beautiful when finished due to the contrasting end grain and long grain and is a great addition to your woodworking skillset!
_________________________________________________________________Support what I do by becoming a Patron! I want to increase the production quality of my videos and thus need to finance some new equipment. Follow the link below to help me out! Thank you in advance! https://www.patreon.com/mattestlea
_________________________________________________________________See what tools I use here: https://kit.com/MattEstlea
My Website: www.mattestlea.com
_________________________________________________________________My name is Matt Estlea, I’m a 22 year old Woodworker from Basingstoke in England and my aim is to make your woodworking less s***.
I come from 5 years tuition at Rycotewood Furniture Centre and 4 years experience working at Axminster Tools and Machinery where I still currently work on weekends. During the week, I film woodworking projects, tutorials, reviews and a viewer favourite ‘Tool Duel’ where I compare two cometitive manufacturers tools against one another to find out which is best.
I like to have a laugh and my videos are quite fast paced BUT you will learn a lot, I assure you.Lets go make a mess.
Comments Off on How to cut a BRIDLE JOINT by HAND
August 3, 2018
Workbench Customisations – Saw Hangers | Paul Sellers
Paul Sellers
Published on 13 Jul 2018Paul hangs his three backsaws at the bench to keep them at hand. The holders make sure that they can’t fall off when not in use in the day to day of woodworking.
For more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
Comments Off on Workbench Customisations – Saw Hangers | Paul Sellers
August 1, 2018
Workbench Customisations: Tool Well Add-on | Paul Sellers
Paul Sellers
Published on 27 Jul 2018This additional tool well is very handy for storing and organising tools you want to keep off the bench but close at hand.
Paul used the following stock, but it will depend on what you have available and the size of your bench:
2 of ¾” x 3” x 66” / 19 x 76 x 1676mm
1 of ¾” x 6 ½” x 66” / 19 x 165 x 1676mm
2 of ¾” x 3” x 6” / 19 x 76 x 152mmFor more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
Comments Off on Workbench Customisations: Tool Well Add-on | Paul Sellers
July 25, 2018
Relaxing finish application with explanation/instruction [ASMR] | Paul Sellers
Paul Sellers
Published on 5 Jul 2018This is an excerpt of a longer instructional series on woodworkingmasterclasses.com. In this video, Paul Sellers carefully applies a shellac finish to a small wooden shelf he just completed.
Paul is a master craftsman and, even though what he is doing here is super basic, it shows.
Sit back, relax and enjoy!
For more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
Comments Off on Relaxing finish application with explanation/instruction [ASMR] | Paul Sellers
July 19, 2018
How to Make Trestles Episode 2 | Paul Sellers
Paul Sellers
Published on 29 Jun 2018Paul assembles the legs of the trestle. Then the posts are marked out and fixed in place to make a sturdy reliable trestle, using gussets for additional strength and rigidity.
Cutting list, drawings and tool and hardware lists can be downloaded here:
https://paulsellers.com/trestles-drawings-and-cutting-list-download/Music credit:
Henry Horrell (https://soundcloud.com/henry-horrell)For more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
Comments Off on How to Make Trestles Episode 2 | Paul Sellers
July 13, 2018
How It’s Made: Laminated Wood Beams
Al Hilli
Published on 25 Apr 2013
Comments Off on How It’s Made: Laminated Wood Beams
July 9, 2018
How to Make Trestles Episode 1 | Paul Sellers
Paul Sellers
Published on 18 Jun 2018Trestles can be used to support stock or pieces in a variety of configurations and also as temporary work supports that are simple to make. Paul has used this style of trestle around the shop for years and used them in his workbench project to provide a solid base to work from.
Cutting list, drawings and tool and hardware lists can be downloaded here:
https://paulsellers.com/trestles-drawings-and-cutting-list-download/There is more discussion on these videos on Woodworking Masterclasses. You can sign up (for free) here: https://woodworkingmasterclasses.com/videos/trestles/
Music credit:
Henry Horrell (https://soundcloud.com/henry-horrell)For more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
Comments Off on How to Make Trestles Episode 1 | Paul Sellers
June 25, 2018
What’s inside Ikea’s “wood” ?
Rag ‘n’ Bone Brown
Published on 12 May 2018In this video I cut open one of Ikea’s Linnmon shelves to find out what’s inside.
Comments Off on What’s inside Ikea’s “wood” ?
June 23, 2018
Garage Update NO.1 | Paul Sellers
Paul Sellers
Published on 22 Jun 2018Have you been wondering about Paul’s new garage? In this video Paul gives you a tour and some insights into his decisions about setting up this new space.
Paul talks about his workbench, workbench customisations, wood storage, tool storage, clamp storage, shop configuration and more.
It’s all starting to come together now and we are excited to show you the progress made so far.
For more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
Comments Off on Garage Update NO.1 | Paul Sellers
