Rex Krueger
Published 18 Mar 2026All my plans!: https://www.rexkrueger.com/
Patrons saw this video early: / rexkrueger
Compass Rose Toolworks: https://www.compassrosetools.com/
Join the Mailing List: http://eepurl.com/g3rkmv
Take a course: https://www.rexkrueger.com/courses
Get my woodturning book: http://www.rexkrueger.com/book
Follow me on Instagram: @rexkrueger
March 19, 2026
The Two-Handed Chisel Technique You Should Learn
Comments Off on The Two-Handed Chisel Technique You Should Learn
December 18, 2025
How to Carve a Star | Paul Sellers
Paul Sellers
Published 25 Jul 2025I have been asked to create this video for some time but couldn’t get to it. Here it is.
All you need is a good sharp chisel. This chisel is an Aldi, £2.50 version, so nothing special. The steps I show guarantee a positive outcome, but please be prepared to put in some practice on a scrap of wood. Avoid softwoods because they have hard and soft aspects surrounding the growth rings which are sometimes difficult to work with. I’m using cherry, but there are many choices that have consistent grain, such as poplar, oak, and walnut.
Carving this star took me a little over half an hour to do. With practice, you will get to understand the grain of the wood, direction and the chiselling techniques I used. I hope you enjoy creating your star!
(more…)
Comments Off on How to Carve a Star | Paul Sellers
November 29, 2025
Exploring Hand Tool Woodworking | Paul Sellers
Paul Sellers
Published 28 Nov 2025Most of the woodworkers I come to meet have lost any working knowledge of just how efficient and effective hand tools are in daily woodworking, and yet I have used them to make my living for 60 years. Not only have they lost the skills and knowledge, but they have lost belief in themselves and the ability to use them.
With our team, I have spent three decades training hundreds of thousands of woodworkers worldwide to use the methods I was raised with as an apprentice, and they are discovering that hand tools are not outdated or outmoded.
Watch this video and ask yourselves, if you couldn’t use tools just like these in your day-to-day woodworking.
——————–
(more…)
Comments Off on Exploring Hand Tool Woodworking | Paul Sellers
April 20, 2025
Using Paul’s Sharpening System | Paul Sellers
Paul Sellers
Published 13 Dec 2024Want to make this system? Here’s how: • Making Paul’s Sharpening System | Pau…
I have been sharpening edge tools for sixty years and every single day of my life, and the fastest way to get the surgically sharp edge comes when you master freehand sharpening.
This video gets you started, and you will see how easy and quick it is to sharpen your edge tools once you take the first step, following this simple how-to.
(more…)
Comments Off on Using Paul’s Sharpening System | Paul Sellers
February 7, 2025
How to Make a Wallclock | Episode 7
Paul Sellers
Published 11 Oct 2024Refining the cove with a gouge and then scraping it and sanding it prepares us to fit the cove to the timepiece.
In this episode, Paul walks you through mitering the cove by hand using a poor man’s mitre guide and a block plane to trim and fit the mitres freehand.
We walk you through using CA (superglue) to attach the coved pieces securely and permanently in place.
Once done, we can apply our choice of finish. Three to four coats are usually enough after sanding the first to take away any raised grain.
——————–
(more…)
Comments Off on How to Make a Wallclock | Episode 7
June 15, 2024
Dado by Hand
Lost Art Press
Published Mar 6, 2024Megan Fitz demonstrates her dado cutting process by hand for a Dutch tool chest. Will the shelf fit?
Comments Off on Dado by Hand
April 30, 2024
3 Chisel Mortise Method | Paul Sellers
Paul Sellers
Published Jan 19, 2024Sometimes, we avoid simple joinery because we believe it cannot be done well, and efficiently by hand. This mortise, 4″ long and 1 1/2″ deep by half an inch, took me around seven minutes.
In any hardwood, oak, for instance, it might take a minute longer, but no more. I did this video to show a technique using my mortise guide and a strategic way using three standard chisels and a method.
I am making a bed with eight mortise and tenon joints, and the mortise I chopped here is one of them.
Enjoy real woodworking with me; it doesn’t always need to be called work!
(more…)
Comments Off on 3 Chisel Mortise Method | Paul Sellers
October 18, 2023
Sharpening a Chisel in under a Minute | Paul Sellers
Paul Sellers
Published 15 Jun 2023I see more and more options for sharpening a chisel and yet, with no mechanical means at all, I go from a chisel I have dulled to surgically sharp in about a minute or less.
The fact is I never need to use a grinding wheel, and I was taught to sharpen by the masters of sharpening in my apprenticeship days 58 years ago which I have never strayed from because I found every other option too slow and, dare I say it, DULL and time consuming no matter which method or which machine!
Watch the video and see what you feel.
(more…)
Comments Off on Sharpening a Chisel in under a Minute | Paul Sellers
April 20, 2023
Don’t buy these USELESS vintage chisels
Rex Krueger
Published 19 Apr 2023Save your money and make the smart choices when you’re tool shopping.
(more…)
Comments Off on Don’t buy these USELESS vintage chisels
May 31, 2021
When to use Bevel up or Bevel Down with a Chisel | Paul Sellers
Paul Sellers
Published 23 Feb 2021Bevel up or bevel down chisel work? This question comes up often because for some reason, mainly from school woodworking, kids are taught to remove waste from a housing dado, recess, or other using only the bevel down. In reality, however, we need to be ready to use both or one or the other at different times. I hope that this video will help to show alternative ways and also show just how very versatile the chisel is for various applications.
——————–
Want to learn more about woodworking?
Go to Woodworking Masterclasses for weekly project episodes: http://bit.ly/2JeH3a9
Go to Common Woodworking for step-by-step beginner guides and courses: http://bit.ly/35VQV2o
http://bit.ly/2BXmuei for Paul’s latest ventures on his blog
——————–
Instagram: http://bit.ly/2oWpy7W
Twitter: http://bit.ly/33S7RFa
Pinterest: http://bit.ly/35X5uTf
Comments Off on When to use Bevel up or Bevel Down with a Chisel | Paul Sellers
May 13, 2021
What can you do with a chisel?
Rex Krueger
Published 12 May 2021Learn how to use the chisel: the most versatile tool in your shop!
More video and exclusive content: http://www.patreon.com/rexkrueger
(more…)
Comments Off on What can you do with a chisel?
January 17, 2021
Why you should try mortising by hand
Stumpy Nubs
Published 14 Oct 2020This old-timey technique can save you time and be REALLY satisfying too!
Subscribe (free) to Stumpy Nubs Woodworking Journal e-Magazine► http://www.stumpynubs.com/subscribe.html
When you use this link to visit our sponsor, you support us►
Narex Chisels and Hand Tools: https://taytools.com/collections/bran…
Mortising Chisels: https://taytools.com/collections/bran…Follow us on social media►
Instagram: https://www.instagram.com/stumpynubs/
Twitter: https://twitter.com/StumpyNubs
Comments Off on Why you should try mortising by hand
December 17, 2020
Make cheap chisels AMAZING with this traditional handle
Rex Krueger
Published 16 Dec 2020Remake your budget chisels with some quick metal-work and a fancy new handle.
More video and exclusive content: http://www.patreon.com/rexkrueger
Get the London Pattern Drawing (FREE): http://www.rexkrueger.com/store
Get these chisels! https://amzn.to/2LtYDeu (affiliate)
(more…)
Comments Off on Make cheap chisels AMAZING with this traditional handle
November 19, 2020
Buying vintage chisels online: a complete guide
Rex Krueger
Published 18 Nov 2020Is it possible to find a quality chisel online? Let’s look at the best tricks and tips.
More video and exclusive content: http://www.patreon.com/rexkrueger
Narex True Imperial Chisels: https://amzn.to/2EX4xls
(more…)
Comments Off on Buying vintage chisels online: a complete guide
September 9, 2020
How to Sharpen a V Tool or Carving Gouge – Hand Tool Woodworking
Wood By Wright
Published 18 May 2017What good is a carving chisel if it is not sharp? The V-tool and Carving gouge are easier to sharpen than they look if you understand a few basic Hand Tool truths. Any blade is sharpened the same way but some blades require the right tool to reach the tip. All woodworking is, is a sharp iron working its way through the wood. Here is how to do it!
—Tools used—
Diamond Stones: http://amzn.to/2oppz0J (I use Extra-coarse, Medium-fine, and Extra-fine)
Carving kit: http://amzn.to/2kf8Wjb
Honing compound – http://amzn.to/2rdZrs9—Tools I Use—
http://www.woodbywright.com/tool-sugg…////Help this channel grow\\\\
Patreon: http://patreon.com/woodbywright////You Can find me:\\\\
Instagram: https://www.instagram.com/woodbywright/
Instructables: http://www.instructables.com/member/w…
Lumber Jocks: http://lumberjocks.com/Sarahsliefie
Periscope: @WoodByWright
Website: http://WoodByWright.com
Comments Off on How to Sharpen a V Tool or Carving Gouge – Hand Tool Woodworking
