Quotulatiousness

June 27, 2019

You don’t need a block-plane (believe it or not!)

Filed under: Tools, Woodworking — Tags: , , — Nicholas @ 06:00

Rex Krueger
Premiered 2 hours ago

More video and exclusive content: http://www.patreon.com/rexkrueger
Get the FREE Tip Sheet: https://www.rexkrueger.com/articles/2019/6/25/tip-sheet-understanding-block-planes
Plans, t-shirts, and hoodies: http://www.rexkrueger.com/store

Get my woodturning book: http://www.rexkrueger.com/book

Check out the Woodwork for Humans Series: https://www.youtube.com/watch?v=3FKyz…

More videos on planes: https://www.youtube.com/playlist?list…

“Raise our taxes!” cried the hypocritical virtue signallers

Filed under: Economics, Government, Media, Politics, USA — Tags: , , — Nicholas @ 05:00

We’ve been over this ground before. Some very rich people are getting fawning media coverage for their “selfless”, “virtuous” demand that the government raise their taxes. Except they’re far from selfless: they’re demanding that other people be forced to pay more tax, but they’re very much not putting their own money where their bleating mouths are. Most governments are happy to accept more money from you than your formal tax liabilities:

… are all very eager to accept your contributions. But most people don’t take advantage of this mechanism, especially the ones garnering headlines for their “altruism”. Because they’re virtue signalling, and almost certainly don’t actually want to be taxed more. Don’t believe what people merely say they want, watch what they actually do (economists call this “revealed preference“). Hypocrites, the lot of them.

Router Plane Q&A | Paul Sellers

Filed under: Tools, Woodworking — Tags: , , — Nicholas @ 04:00

Paul Sellers
Published on 26 Jun 2019

The router plane remains one of the most essential tools for hand tool woodworkers. It is used to refine cuts which are either made by chisels, saws or machines, Paul often even uses a router plane as an improvised marking gauge. In this Q&A Paul answers some of your questions regarding this remarkable tool.

Questions:
0:59 What wood do you recommend for making an extension plate for the base of the router plane? How thick should it be?
2:55 Recently the floor of some elements I have chopped have been deeper than my Stanley router reaches. Is there a way to extend the depth reach?
4:14 Having just bought my first router plane I was wondering what basic maintenance should I do to restore it to a good working tool?
5:17 What is the best way to set the height to make sure you don’t plane too deeply?
7:11 Do you recommend attaching a wooden support screwed to the base of the plane?
7:54 My Veritas router plane changes depth during the cut (the shank of the iron slips in the collar). Is there a trick that will prevent this slippage and help ensure an equal depth across the entire surface?
10:11 How does one prevent tear out when routing?
12:11 One thing I’ve noticed by watching your videos is that you only use the router plane to put the finishing touches on tenon cheeks, dados and the like. Was the router plane designed for more than this or is this where the router shines?
15:04 Grain issues? Cutting out a channel/tenon, I often ‘dig in’ (no, not taking big cuts), likely due to grain? You’ve mentioned ‘feeling’ for grain with No4 plane, how do you address this with the router plane?
18:05 The main issue I have when using a router is that the shavings end up between the sole of the plane and my workpiece. These shavings scar the wood of my workpiece. How to prevent this? Or is this to do with the router plane itself?
21:40 Is the router plane effective for making a groove with the width of the iron or a rebate, as you do with the plough plane?
23:55 Is it important to get a router plane with the micro adjustment height wheel for that extra precision, or will a model without the adjustment wheel do the job just fine?
26:02 Are there specific times when you would reach for a router plane over a plough plane (and vice versa) when either could seemingly be used?
27:49 Diamond point vs square blade
28:46 How to prepare the wood for the sole?

The featured Paul Sellers book is available to order from anywhere in the world. Click the link to find out more: https://paulsellers.com/paul-sellers-…

Want to learn more about woodworking? See https://woodworkingmasterclasses.com or https://commonwoodworking.com for step-by-step videos, guides and tutorials. You can also follow Paul’s latest ventures on his woodworking blog at https://paulsellers.com/

$26B, $56B, $70B, and pretty soon you’re talking real money

Filed under: Cancon, Military — Tags: , , , , — Nicholas @ 03:00

The headline refers to the constant upward movement of various estimates on how much the Canadian government will be required to spend on the Canadian Surface Combatant program. In shorthand, that’s the money required to replace the Royal Canadian Navy’s current fleet of 12 frigates and the Iroquois-class destroyers that have already been retired from service. The Halifax-class frigates began entering service in the early 1990s and were designed to operate for about thirty years, meaning the RCN needs replacements to start coming into the fleet in the mid-2020s. The government initially budgeted around $26B for fifteen ships in 2008, but as with so many military equipment programs, no actual steel has been cut to begin building the new ships … in fact the design was only formally agreed in October 2018 and not signed (due to a lawsuit from one of the losing bidders) until February of this year. We’re still probably 2-3 years away from construction of the first ship in the class beginning, which will mean the Halifax class will have to remain on duty for longer (and older ships require more frequent and more expensive maintenance).

A Chilean navy boarding team fast-ropes onto the flight deck of RCN Halifax-class frigate HMCS Calgary (FFH 335) during multinational training exercise Fuerzas Aliadas PANAMAX 2009.
US Navy photo via Wikimedia.

The Department of National Defence most recently estimated up to a $60B final bill, but the Parliamentary Budget Office estimate was $70B (an increase of $8B over a two-year span), and there’s no reason to assume that things will magically get cheaper between now and whenever Irving Shipbuilding starts construction of the first new ship. David Pugliese reports:

… it could be years before the real cost to taxpayers for the mega-project is actually known as the project is just getting started.

The PBO report warned that any delays in building the first ship will be costly. A delay of one year, for instance, could increase costs by almost $2.2 billion, it added.

The federal government hopes to begin building the ships starting in the early 2020s.

Pat Finn, the head of procurement at DND, said the PBO estimates largely align with what the department figures as the cost of the program. He noted that unlike the PBO, the department does not consider tax in its cost figures. That is because those fees ultimately go back to the federal treasury.

But he also agreed with the PBO on the concern about added cost if the project is delayed. “That is a key one for us. It’s something we’re watching carefully,” said Finn, assistant deputy minister for materiel.

The CSC program is currently in the development phase. The government projects the acquisition phase to begin in the early 2020s with deliveries to begin in the mid-2020s. The delivery of the 15th ship, slated for the late 2040s, will mark the end of that project.

The Liberal government announced in February that it had entered into a contract with Irving Shipbuilding to acquire new warships based on the Type 26 design being built in the United Kingdom. With Canada ordering 15 of the warships, the Royal Canadian Navy will be the number one user of the Type 26 in the world.

The United Kingdom had planned to buy 13 of the ships but cut that down to eight. Australia plans to buy nine of the vessels designed by BAE of the United Kingdom.

The entry of the BAE Type 26 warship in the Canadian competition was controversial from the start and sparked complaints the procurement process was skewed to favour that vessel. Previously the Liberal government had said only mature existing designs or designs of ships already in service with other navies would be accepted, on the grounds they could be built faster and would be less risky. Unproven designs can face challenges as problems are found once the vessel is in the water and operating.

But the requirement for a mature design was changed and the government and Irving accepted the BAE design, though at the time it existed only on the drawing board. Construction began on the first Type 26 frigate in the summer of 2017 for Britain’s Royal Navy, but it has not yet been completed. Company claims about what the Type 26 ship can do, including how fast it can go, are based on simulations or projections.

BAE Systems released this artist’s rendition of the Type 26 Global Combat Ship in 2017, which is the design selected by the Canadian government for the Canadian Surface Combatant program.
(BAE Systems, via Flickr)

Ted Campbell commented on the report:

I’m not sure the new ($70 Billion) figure is a terribly useful number for taxpayers like you or me or for policymakers, either. I’m not convinced that DND, itself, much less the whole of government, including the PBO, has a common, coherent understanding of “life-cycle costs,” and I’m damned sure neither the media nor 99.99% of Canadians has one. I’m glad to see that the government includes “the cost of project development, production of the ships, two years of spare parts and ammunition, training, government program management, upgrades to existing facilities, and applicable taxes” but that’s just the tip of the iceberg. These ships are going to be in service for 35± years and they are going to cost money to own and operate every hour of every day and I hope someone is programming ongoing costs (running costs, routine maintenance, upgrades and refits and life extension projects and even disposal) into the long term defence budget guesstimates.

Good management says that the DND budget should be pretty well fixed for the next year or two, fairly firm (even allowing for a change in government) for four or five years beyond the end of the next fiscal year it should be and a reliable planning guide for the next decade or even two. In other words, DND should have a pretty good idea about what it will cost to operate itself, pretty much as it is now, for a generation. I expect (hope, anyway) that defence planners have a “Christmas wish list” of capabilities they want to add or improve/increase (with costs attached) should a defence friendly government ever materialize in Canada or, sadly but more likely when, not if, the need arises.

He also points out the hidden truism about huge government purchases:

… from 1950 to 1958 the several hundred Canadair F-86 Sabre jets that Canada bought for the RCAF was, probably, “the largest single expenditure in Canadian government history,” then from the early 1950s until 1964 the production of 20 destroyers (DDE and DDH) of the St Laurent, Restigouche, Mackenzie and Annapolis classes (all based on one, baseline, design) was, almost certainly, “the largest single expenditure in Canadian government history,” and I know for a fact that the purchase decision (in 1980) of 138 CF-18 Hornets made it “the largest single expenditure in Canadian government history.” The simple fact is that the costs of high-tech aircraft, howitzers, tanks, radios and, especially, ships, keep climbing far faster than inflation and if, as we must, we want our armed forces to be adequately equipped then we need to accept higher costs … especially if we want to build ships in Canadian yards, employing Canadian workers.

HMCS Annapolis at Pearl Harbour in 1995 (via Wikipedia)

Tank Chats #50 Ha-Go | The Tank Museum

Filed under: History, Japan, Military, Technology, WW2 — Tags: , — Nicholas @ 02:00

The Tank Museum
Published on 18 May 2018

The Type 95 Ha-Go tank was produced by the Imperial Japanese Army in 1935 and used throughout the Second World War.

The Tank Museum’s Type 95 was captured in Malaya and was examined in Calcutta before being sent to Britain. Surviving Japanese tanks from the Second World War are extremely rare.

Support the work of The Tank Museum on Patreon: ► https://www.patreon.com/tankmuseum
Or donate http://tankmuseum.org/support-us/donate

Visit The Tank Museum SHOP: ►https://tankmuseumshop.org/

Twitter: ► https://twitter.com/TankMuseum
Tiger Tank Blog: ► http://blog.tiger-tank.com/
Tank 100 First World War Centenary Blog: ► http://tank100.com/ #tankmuseum #tanks

QotD: “Misandropologies”

Filed under: Politics, Quotations, USA — Tags: , , , , — Nicholas @ 01:00

… in the same manner that many white people who initially signed on to the whole “don’t be a racist” program because it seemed fair were eventually alienated by the escalating rhetoric of “justice won’t be achieved until the last evil melanoma-prone ice devil baby is smashed dead against a rock,” many men — and even women — who had no problem with ideas such as equal pay and female suffrage started to get grossly turned off by rhetoric and policies that viewed being born male as an original sin that demanded eternal punishment.

Even though black women live longer than white men in the USA … and even though women control more disposable wealth than men do … and even though women are snagging most of the college degrees these days … and even though the law and public sympathy heavily lean toward women in any dispute between the sexes … and even though the media portray men as either bumbling incompetents or bloodthirsty rape-monsters … and even though men are far more likely to commit suicide, die on the job, or be homeless than women … we’re still lectured by these bitter fat blobs and their testosterone-free male enablers that misandry isn’t real because men still benefit from certain mysterious “systemic” and “institutional” advantages that none of these assholes seem able to enumerate even when calmly asked to do so.

It’s a funny sort of “patriarchy” we inhabit.


To allege that women are capable of malice and violence and deception is only to allege that they’re human. To expect anything less of them would be dehumanizing and patronizing — which, ironically, shares a root word with “patriarchy.” When feminism ditched the “equity” rhetoric in favor of a menses-splattered pagan goddess religion that depicts men as irredeemable worker drones and women as innocent angels, men who weren’t entirely asleep or pussy-whipped realized that the rules had changed and that they were under attack. But even to notice that a lot of women openly exult in hating men gets you labeled a “woman-hater.”

Misandry is real, and those who seek to deny or justify it deserve a stern paddling. And even if you acknowledge that it’s real, don’t try to make excuses for it using some postmodern gobbledygook, because then you become a misandry apologist — a misandropologist. Just admit that women can be every bit as mean, nasty, horrid, foul, vile, shitty, and hateful as men. It’s part of the human condition.

Naïve as it may be, I envision an enlightened future where there is no longer any misogyny or misandry — only a beautiful, sweet, shared sense of misanthropy.

Jim Goad, “Confronting the Misandropologists”, Taki’s Magazine, 2017-05-08.

Powered by WordPress