Forgotten Weapons
Published on 9 Sep 2018http://www.patreon.com/ForgottenWeapons
Well, my 8mm French Chauchat finally cleared transfer, as did my application to reactivate it. This was a “dewat”, or “Deactivated War Trophy” – a machine gun put on the NFA registry but modified to be non-firing. This is not the same as legal destruction, as the receiver of the gun remained intact. The method of deactivation on such things can very significantly; in this case the chamber was plugged with weld, the bolt face welded up, and the barrel extension welded to the receiver. I did have an intact spare bolt and barrel assembly, however.
I removed the weld holding the barrel assembly in place, cleaned it up a bit, and dropped in my new parts.
Legal note: this was done after the receipt of an approved Form 5 from ATF, complete with tax stamp.
Today I took it out to the range for the first time, to see if any further work would be needed. And yeah, there was a bit of tweaking necessary. The feeding and extraction are solid, but the ejection requires some work. So, after swapping in a better extractor, I headed back to the range for another test run.
This time it ran great, with the exception of one bad magazine (3 of 4 being 100% reliable is better than I expected, given their age and construction). So now, I have a fully functioning Chauchat and three known-good magazines. Next up? Two-gun match! Stay tuned…
If you enjoy Forgotten Weapons, check out its sister channel, InRangeTV! http://www.youtube.com/InRangeTVShow
September 29, 2018
8mm M1915 Chauchat Fixing and Range Testing
Comments Off on 8mm M1915 Chauchat Fixing and Range Testing
No Comments
No comments yet.
RSS feed for comments on this post.
Sorry, the comment form is closed at this time.
