Victoria and Albert Museum
Published on 24 Jul 2017Plywood is a simple material made by glueing together thin sheets of wood, known as veneers or plies. These basic elements have remained broadly the same throughout its history. The most significant breakthrough in its production came in the early 1800s with the development of steam-powered machines that could cut veneers cheaply. The most influential of these was the rotary veneer cutter.
The cutter rotates a log against a wide, horizontal blade, causing it to ‘peel’ into a continuous sheet of wood. This enables the creation of longer, wider sheets of veneer than previously possible and with little waste. Using these machines meant that plywood could be manufactured quickly and inexpensively on a large scale.
This film shows the stages in manufacturing plywood boards in the mid-20th century and today. The process remains essentially unchanged, although today many of the machines are much faster and computer controlled.
Produced as part of the V&A exhibition Plywood: Material of the Modern World (15 July – 12 November 2017) https://www.vam.ac.uk/plywood
Sponsored by MADE.COM. Supported by the American Friends of the V&A
Find out more about plywood with our fascinating exhibition book, Plywood: A Material Story
https://www.vam.ac.uk/shop/plywood-a-material-story-148486.html
May 10, 2018
Manufacturing plywood boards: then and now
Comments Off on Manufacturing plywood boards: then and now
No Comments
No comments yet.
RSS feed for comments on this post.
Sorry, the comment form is closed at this time.
