Quotulatiousness

May 11, 2013

The “Liberator” isn’t really a gun … it’s a political theatre prop

Filed under: Liberty, Media, Politics, USA, Weapons — Tags: , , , , — Nicholas @ 00:01

In The Register, Lewis Page points out that the 3D printed “Liberator” isn’t actually much of a gun at all:

People are missing one important point about the “Liberator” 3D-printed “plastic gun”: it isn’t any more a gun than any other very short piece of plastic pipe is a “gun”.

You can take my Liberator ... and shove it

You can take my Liberator … and shove it

Seriously. That’s all a Liberator is: a particularly crappy pipe, because it is made of lots of laminated layers in a 3D printer. Attached to the back of the pipe is a needlessly bulky and complicated mechanism allowing you to bang a lump of plastic with a nail in it against the end of the pipe.

An actual gun barrel is a strong, high quality pipe — almost always made of steel or something equally good — capable of containing high pressure gas. It has rifling down the inside, making it narrow enough that the hard, tough lands actually cut into the soft bullet jacket (too small for the bullet to actually move along, unless it is rammed with massive force). At the back end there is a smooth-walled section, slightly larger, into which a cartridge can be easily slipped.

It’s not much of a gun at all. But as with the old saying about the dancing bear, it’s not how well it dances but that it dances at all. After some 100,000 downloads, the company was requested to take the files offline on Thursday:

1 Comment

  1. Page’s complaint It is – a little – like comparing a new Lenovo ThinkPad to ENIAC, sneering at the latter because it lacks mouse drivers.

    Sure, a Liberator is not much of a firearm. But it does function, and is a precursor of things to come.

    Comment by Brian Dunbar — May 11, 2013 @ 10:23

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Powered by WordPress